9. Using the combined gas law, the volume of the gas at STP can be calculated as 112.2 L. This equation takes into account the initial pressure, temperature, and volume, as well as the new pressure and temperature at STP.
10. Applying Boyle's law, the new volume of the air inside the submarine would be approximately 87,873.2 L. This is calculated by multiplying the initial volume and pressure, and dividing by the new pressure.
11. Using the combined gas law, the new volume of the balloon can be calculated as 0.98 L. This equation takes into account the initial temperature, volume, and pressure, as well as the new temperature.
12. Using Boyle's law, the new pressure of the gas can be calculated as 3.25 atm. This equation takes into account the initial pressure and volume, as well as the new volume.
13. Using Charles' law, the new volume of the person's lungs can be calculated as 3.8 L. This equation takes into account the initial lung capacity and temperature, as well as the new temperature.
It is highly unlikely that a person would actually explode from anger, as the body has mechanisms in place to regulate pressure and prevent such an event.
To know more about Charles' law click on below link:
https://brainly.com/question/16927784#
#SPJ11
How many moles of gas occupy 128L at a pressure of 4. 2 atm and a temperature of 382K
To solve this problem, we need to use the ideal gas law which states that PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature. Rearranging this equation, we can solve for n by dividing both sides by RT.
n = PV/RT
Now, we can plug in the given values:
n = (4.2 atm)(128 L)/(0.0821 L*atm/mol*K)(382 K)
n = 16.4 moles
Therefore, 16.4 moles of gas occupy 128L at a pressure of 4.2 atm and a temperature of 382K.
It's important to note that the ideal gas law is only applicable to ideal gases, which follow certain assumptions such as having no intermolecular forces and having particles with negligible volume. Real gases can deviate from these assumptions, especially at high pressures and low temperatures. However, for most practical purposes, the ideal gas law provides a good approximation of gas behavior.
To know more about ideal gas law refer here
https://brainly.com/question/28257995#
#SPJ11
Symbols used in chemical equations, together with the explanations of the symbols, are shown below. Which set is correctly matched?
A. (aq), dissolved in water
B. (g), grams
C. (so), solid
D. (l), liters
The explanations aq and g are the ones that accurately explain the chemical equation. The appropriate choices are thus C. (so), solid
D. (l), liters
What are the four roles that symbols play?
Symbols serve the following four purposes: Motivating others to take action via emotion; socially uniting groups by fostering a sense of common identity and values Clarification and revelation - show insight and clarity into the divine. Communication - conveying emotional components of an event.
The product and reactant symbols have been used to represent the chemical equation. The moles of an element that underwent a reaction are contained in the chemical equation. Prior to the compound, the moles were written as the coefficient.
learn more about chemical equations
brainly.com/question/21049751
#SPJ1
how does hydrogen peroxide contribute to photochemical smog?
Hydrogen peroxide is a major contributor to photochemical smog, which is a type of air pollution that is formed through the reaction of sunlight with various pollutants in the atmosphere.
When sunlight shines on the atmosphere, it causes a chain reaction that leads to the formation of photochemical smog.
Hydrogen peroxide is produced in the atmosphere through the reaction of hydrocarbons and nitrogen oxides. Hydrocarbons are compounds that contain carbon and hydrogen, and they are emitted by vehicles, factories, and other sources. Nitrogen oxides are emitted by vehicles and power plants.
When these two pollutants react with sunlight, they form a variety of other compounds, including hydrogen peroxide. The hydrogen peroxide then reacts with other pollutants in the atmosphere, such as volatile organic compounds, to form photochemical smog.
Photochemical smog is a serious environmental issue because it can cause a variety of health problems, including respiratory issues, eye irritation, and even cancer. It can also damage crops and other vegetation, and can contribute to global warming.
Overall, hydrogen peroxide plays a key role in the formation of photochemical smog, and reducing its emissions is an important step in improving air quality and protecting public health.
To know more about Hydrogen peroxide, visit:
https://brainly.com/question/29102186#
#SPJ11
How many moles of ice will form if 105 kJ of heat is removed from liquid
water at 0°C? The enthalpy of solidification for water is 6.01 kJ/mol.
17.5 moles of ice will form if 105 kJ of heat is removed from liquid water at 0°C.
What is moles?Moles are small, burrowing mammals that belong to the Talpidae family. They are dark brown or black in color, with short, velvety fur and a pointed snout. Moles are solitary creatures and feed mainly on insects, earthworms, and grubs. They dig extensive tunnel systems and use their powerful front claws to break through the soil. Moles have poor eyesight, so they rely on their sense of touch and smell to find food and explore their environment. They are found in many parts of the world, including North America, Europe, and Asia. Moles are important for the ecosystem because they aerate the soil and help disperse plant seeds.
The amount of ice formed can be calculated using the equation:
Q = moles x enthalpy of solidification
where Q is the amount of heat removed (105 kJ), moles is the number of moles of ice formed, and enthalpy of solidification is 6.01 kJ/mol.
Solving for moles, we get:
moles = Q/enthalpy of solidification
moles = 105 kJ/6.01 kJ/mol
moles = 17.5 moles.
To learn more about moles
https://brainly.com/question/15356425
#SPJ1
Dangers in your home: knowing how to handle household products containing
hazardous materials or chemicals can reduce the risk of injury. It is important to store
household chemicals where children cannot access them. Remember that common
products such as aerosol cans of hair spray and deodorant, nail polish and nail polish
remover, toilet bowl cleaners and furniture polishes are hazardous
materials. Sometimes using these products incorrectly can result in a dangerous
situation.
Many household cleaners, particularly toilet cleaners and some drain cleaners have
acid in them. This is the equation representing hydrocloric acid plus bleach.
NaCIO + 2 HCI- Cl₂ + H₂O + NaCl
Imagine you have just mixed the two seemingly non-toxic products, toilet bowl
cleaner and bleach to do a really thorough job in your bathroom. All of a sudden you
feel dizzy and your eyes and nose are burning. Explain what has happened.
You mixed the products in a confined space and there is not much oxygen left to
breathe.
By mixing the two, the chemical reaction released a product that is potentially
toxic: chlorine gas.
A chemical reaction occurred and you released sodium chloride into the air that
caused your dizziness.
When the NaCIO decomposes during mixing, the excess oxygen in the air will
produce dizziness.
By mixing toilet bowl cleaner and bleach, a chemical reaction occurs, which releases a potentially toxic gas: chlorine gas. Chlorine gas can cause irritation to the eyes, nose, and throat, as well as difficulty breathing, coughing, and wheezing. The correct answer is 2.
Inhaling high levels of chlorine gas can even lead to chest pain, vomiting, and death. It is important to always read and follow the labels on household cleaning products and never mix different products together, especially those containing bleach and acids. If you accidentally mix these products and experience symptoms of chlorine gas exposure, seek fresh air and medical attention immediately. Hence option 2 is correct.
To know more about Chlorine gas , here
brainly.com/question/14748176
#SPJ1
Calculate the pH of a solution
in which [H3O+] = 0. 050 M.
The pH of the solution is 1.30
To determine the pH of a solution, the formula:
pH = -log[H3O+]
Given a concentration of H3O+ in the solution as 0.050 M, substituting this value into the formula yields:
pH = -log(0.050)
By evaluating this expression using a calculator, the pH is found to be 1.30. This pH value indicates that the solution is acidic since it is less than 7. The pH scale is logarithmic, meaning that each unit change in pH corresponds to a tenfold change in the acidity or basicity of the solution. Consequently, a solution with a pH of 1 is ten times more acidic than a solution with a pH of 2, and a hundred times more acidic than a solution with a pH of 3, and so forth.
Therefore, a pH of 1.30 denotes a moderately acidic solution.
Know more about pH here:
https://brainly.com/question/2288405
#SPJ11
If the original volume of a gas was 300 L at 0. 250 atm and 400. 0 K, what is the volume of the gas at 2. 00 atm and 200. 0 K?
The volume of the gas at 2.00 atm and 200.0 K is 18.75 L.
We can use the combined to solve this problem:
(P1 * V1) / (T1) = (P2 * V2) / (T2)
where P is pressure, V is volume, and T is temperature.
Plugging in the given values:
(0.250 atm * 300 L) / (400.0 K) = (2.00 atm * V2) / (200.0 K)
Simplifying:
V2 = (0.250 atm * 300 L * 200.0 K) / (2.00 atm * 400.0 K)
V2 = 18.75 L
Therefore, the volume of the gas at 2.00 atm and 200.0 K is 18.75 L.
Gas laws refer to a set of principles that describe the behavior of gases under different conditions, including pressure, temperature, and volume.
There are several gas laws, including Boyle's law, Charles's law, Gay-Lussac's law, and the ideal gas law.
To know more about combined gas law refer to-
https://brainly.com/question/30458409
#SPJ11
What is the mass of solute in a 500mL solutiom of 0. 200 M Sodium Phosphate
The mass of solute in a 500mL solution of 0.200 M Sodium Phosphate is approximately 16.394 grams.
To find the mass of solute in a 500mL solution of 0.200 M Sodium Phosphate, we can follow these steps:
1. Identify the molar concentration (M) of the solution, which is given as 0.200 M.
2. Convert the volume of the solution from mL to L: 500mL = 0.500L.
3. Calculate the moles of solute (Sodium Phosphate) using the formula: moles = Molarity × Volume. So, moles = 0.200 M × 0.500 L = 0.100 moles.
4. Find the molar mass of Sodium Phosphate (Na3PO4). The molar mass of Na is 22.99 g/mol, P is 30.97 g/mol, and O is 16.00 g/mol. Therefore, the molar mass of Na3PO4 is (3 × 22.99) + 30.97 + (4 × 16.00) = 163.94 g/mol.
5. Finally, calculate the mass of solute using the formula: mass = moles × molar mass. So, mass = 0.100 moles × 163.94 g/mol = 16.394 g.
In summary, the mass of solute in a 500mL solution of 0.200 M Sodium Phosphate is approximately 16.394 grams.
To know more about Sodium Phosphate, visit:
https://brainly.com/question/10559079#
#SPJ11
the acid-dissociation constant for benzoic acid (c6h5cooh) is 6.3 x 10-5. calculate the equilibrium concentrations of h3o c6h5coo-, and c6h5cooh in the solution if the initial concentration of c6h5cooh is 0.050 m.
At equilibrium, the concentrations of [tex]H_{3} O+, C_{6} H_{5}COO[/tex]-, and [tex]C_{6} H_{5}COO[/tex] in the solution will be 0.038 M, 0.038 M, and 0.012 M, respectively.
First, we can write the chemical equation for the dissociation of benzoic acid in water as follows: [tex]C_{6}H5COOH + H_{2}O[/tex] ⇌[tex]C_{6}H_{5}COO- + H_{3}O[/tex]
The acid dissociation constant, Ka, is given as 6.3 × 10^-5.
[tex]Ka = [C_{6}H_{5}COO-][H_{3}O+] / [C_{6}H_{5}COOH][/tex]
We can assume that the initial concentration of [tex]C_{6}H_{5}COOH[/tex] is equal to its concentration at equilibrium, x. Thus, at equilibrium:
[tex][C_{6}H_{5}COOH] = x M \\[/tex]
[tex][C_{6}H_{5}COO-] = y M \\[/tex]
[tex][H_{3}O+] = y M\\[/tex]
Using the equilibrium expression and the given value of Ka, we can solve for the values of x and y:
[tex]Ka = [C_{6}H_{5}COO-][H_{3}O+] / [C_{6}H_{5}COOH]\\6.3 * 10^-5 = y^2 / x[/tex]
Since we know that the initial concentration of benzoic acid is 0.050 M, we can write: [tex]x + y = 0.050 M[/tex]
Now we have two equations and two unknowns. Solving for x and y:
[tex]x = 0.012 M\\y = 0.038 M[/tex]
To know more about equilibrium, here
brainly.com/question/30807709
#SPJ4
1. Suppose a gas compresses by 185 mL against a pressure of. 0. 400 atm. How much work is done on the system due to its compression? Show your work and report your answer in Joules
The amount of work done on the system is 34 J and the final positive sign means that this work corresponds to an increase in internal energy of the gas.
Thermodynamic work is called the transfer of energy between the system and the environment by methods that do not depend on the difference in temperatures between the two. When a system is compressed or expanded, a thermodynamic work is produced which is called pressure-volume work (p - v).
The pressure-volume work done by a system that compresses or expands at constant pressure is given by the expression:
W system= -p∆V
W system: Work exchanged by the system with the environment. Its unit of measure in the International System is the joule (J)
p: Pressure. Its unit of measurement in the International System is the pascal (Pa)
∆V: Volume variation (∆V = Vf - Vi). Its unit of measurement in the International System is cubic meter (m³)
In this case:
p= 0.400 atm
ΔV=(185-100)ml = 85 ml
W system= 0.400 atm× 85 ml =34 J
The amount of work done on the system is 34 J and the final positive sign means that this work corresponds to an increase in internal energy of the gas.
To know more about work done here
https://brainly.com/question/24278738
#SPJ4
Help pls! Assuming non-ideal behavior, a 2. 0 mol sample of CO₂ in a 7. 30 L container at 200. 0 K has a pressure of 4. 50 atm. If a = 3. 59 L²･atm/mol² and b = 0. 0427 L/mol for CO₂, according to the van der Waals equation what is the difference in pressure (in atm) between ideal and nonideal conditions for CO₂?
The difference in pressure between ideal and non-ideal conditions for CO₂ is 23.42 atm.
To find the difference in pressure between ideal and non-ideal conditions for CO₂, we need to use the van der Waals equation:
(P + a(n/V)²)(V - nb) = nRT
where P is the pressure, n is the number of moles, V is the volume, T is the temperature, R is the gas constant, a is a constant related to the attractive forces between molecules, and b is a constant related to the volume of the molecules.
First, we need to calculate the volume of the CO₂ molecules using the given values of n and V:
V/n = V/2.0 mol = 7.30 L/2.0 mol = 3.65 L/mol
Next, we can plug in the given values of a, b, n, V, and T into the van der Waals equation:
(P + a(n/V)²)(V - nb) = nRT
(4.50 atm + 3.59 L²･atm/mol²(2.0 mol/3.65 L)²)(7.30 L - 0.0427 L/mol × 2.0 mol) = 2.0 mol × 0.0821 L･atm/mol･K × 200.0 K
Simplifying the equation, we get:
(4.50 + 3.59(2.0/3.65)²)(7.30 - 0.0427 × 2.0) = 32.19
Therefore, the non-ideal pressure is:
Pnon-ideal = 32.19 atm
To find the ideal pressure, we can use the ideal gas law:
PV = nRT
Pideal = nRT/V = 2.0 mol × 0.0821 L･atm/mol･K × 200.0 K/7.30 L
Pideal = 8.77 atm
Finally, we can calculate the difference in pressure between ideal and non-ideal conditions:
ΔP = Pnon-ideal - Pideal = 32.19 atm - 8.77 atm = 23.42 atm
Therefore, the difference in pressure between ideal and non-ideal conditions for CO₂ is 23.42 atm.
Know more about Van der Waals equation here:
https://brainly.com/question/29412319
#SPJ11
_____is a sequence of a chain of amino acids
Answer: polypeptide chain
Explanation:
Do you think humans will ever be able to forecast severe weather with 100% accuracy? What challenges do we face in developing technology that can do so? Besides forecasting tools, what other technology is needed to prevent severe storms from causing disasters? Do you think all countries have the financial capability to support the development and operation of these technologies? If not, do you think there is an ethical obligation for countries with more financial resources to help poorer countries access these technologies? ANSWER CORRECTLY. ANSWER FAST PLSSSS
Weather forecasting has substantially improved thanks to technical and data analytic advancements, but there are still a lot of intricate and dynamic aspects that can influence weather patterns, such as changes in air pressure, temperature, and humidity.
It is challenging to forecast a storm's precise trajectory and strength due to the possibility of unforeseen events and anomalies. The effects of catastrophic weather occurrences can be mitigated and forecasting accuracy can be increased with the help of ongoing technical and scientific developments.
In addition to forecasting technologies, infrastructure should be resilient to the effects of powerful storms and early warning systems that can alert people to approaching danger from severe weather should be available.
Not all countries have the financial means to support the development and application of these technologies. It is morally right for developed countries to help less developed ones obtain this technology.
Learn more about weather forecast:brainly.com/question/31456817
#SPJ1
calculate the molality of a solition with 85 g of KOH added to 590. g of water
Which phrase describes the molarity of a solution?.
The phrase "the molarity of a solution" refers to the concentration of a solution and is defined as the number of moles of solute dissolved in one liter of solution. It is denoted by the symbol "M" and has units of moles per liter (mol/L).
Molarity is a commonly used unit of concentration in chemistry and is particularly useful in stoichiometry calculations, as it allows for the conversion of the volume of a solution to the number of moles of solute present.
For example, a solution with a molarity of 0.1 M contains 0.1 moles of solute per liter of solution. If the volume of the solution is known, it is possible to calculate the number of moles of solute present and use this information to determine other important parameters, such as the mass of the solute or the volume of another solution required for a reaction.
To know more about Molarity refer to-
https://brainly.com/question/8732513
#SPJ11
Converting mass to moles ccc scale proportion and quantity the table shows how many moles are in 6 grams of four elements the equation shows how to use carbon molar mass to find the moles of carbon
Converting mass to moles ccc requires knowing the molar mass of the substance and using it to divide the given mass to find the number of moles
Moles ccc is a unit used to measure the amount of substance, particularly in chemistry. It is defined as the number of atoms, molecules, or ions in 12 grams of pure carbon-12. One mole of any substance contains Avogadro's number of particles, which is approximately 6.022 x 10^23.
To convert mass to moles on the ccc scale, you need to know the molar mass of the substance. Molar mass is the mass of one mole of a substance, expressed in grams per mole. To find the number of moles of a substance, you divide the given mass by its molar mass.
For example, the table given shows how many moles are in 6 grams of four elements: oxygen, sulfur, sodium, and iron. To find the number of moles of oxygen, you divide 6 grams by its molar mass, which is 16 grams per mole. This gives you 0.375 moles of oxygen.
The equation given shows how to use carbon molar mass to find the moles of carbon. The molar mass of carbon is 12 grams per mole. Therefore, if you have a sample of carbon with a mass of 24 grams, you can find the number of moles by dividing 24 grams by 12 grams per mole, which equals 2 moles of carbon.
In summary, converting mass to moles ccc requires knowing the molar mass of the substance and using it to divide the given mass to find the number of moles. The moles ccc scale is a useful unit for measuring the amount of substance in chemistry.
To know more about mass, visit:
https://brainly.com/question/19694949#
#SPJ11
According to the general procedure of Experiment A2b, 213 mg of (E)-stilbene (180. 25 g/mol) was reacted with 435 mg of pyridinium bromide perbromide (319. 82 g/mol) to afford 342 mg of meso-stilbene dibromide (340. 05 g/mol) as a white solid. Calculate the percent yield for this reaction. Enter your answer as digits only (no units), using the proper number of significant figures
The percent yield of the reaction is 80%.
To calculate the percent yield, we need to use the following formula:
Percent yield = (actual yield / theoretical yield) x 100The actual yield of the reaction is 342 mg.
To calculate the theoretical yield, we need to first calculate the number of moles of (E)-stilbene and pyridinium bromide perbromide used in the reaction:
Number of moles of (E)-stilbene
= 213 mg / 180.25 g/mol = 0.001182 molNumber of moles of pyridinium bromide perbromide
= 435 mg / 319.82 g/mol = 0.001361 molTheoretical yield of meso-stilbene dibromide = number of moles of (E)-stilbene x 2 = 0.002364 mol x 340.05 g/mol = 803 mg
Now we can substitute the values into the formula:
Percent yield = (342 mg / 803 mg) x 100 = 80%Therefore, the percent yield of the reaction is 80%.
To learn more about percent yield, here
https://brainly.com/question/17042787
#SPJ4
2. Draw four reasonable resonance structures for the PO3F
2- ion. The central P atom is bonded to the three O atoms and to the F atom. Show formal charges for all four structures.
Four reasonable resonance structures for the [tex]PO_3F^2^-[/tex] are:
Structure 1:
O- P(=O)-O- F
Structure 2:
O- P(-O•)-O•- F
Structure 3:
O•- P(-O)-O- F,
Structure 4:
O•- P(-O•)-O•- F
The [tex]PO_3F^2^-[/tex] ion has four reasonable resonance structures, which are shown below:
Structure 1:
O- P(=O)-O- F, with formal charges of +1 on the P atom, -1 on the F atom, and -1 on each of the two terminal O atoms.
Structure 2:
O- P(-O•)-O•- F, with formal charges of 0 on the P atom, -1 on the F atom, and -1 on each of the two terminal O atoms.
Structure 3:
O•- P(-O)-O- F, with formal charges of -1 on the P atom, -1 on the F atom, and 0 on each of the two terminal O atoms.
Structure 4:
O•- P(-O•)-O•- F, with formal charges of -2 on the P atom, -1 on the F atom, and 0 on each of the two terminal O atoms.
To draw four reasonable resonance structures for the [tex]PO_3F^2^-[/tex] ion, consider that the central phosphorus (P) atom is bonded to the three oxygen (O) atoms and to the fluorine (F) atom. Here are the four resonance structures with formal charges:
1. P is double bonded to one O, single bonded to the other two O atoms, and single bonded to F. The O atom with a double bond has a formal charge of 0, the other two O atoms have a formal charge of -1 each, P has a formal charge of +1, and F has a formal charge of 0.
2. P is double bonded to the second O, single bonded to the other two O atoms, and single bonded to F. The O atom with a double bond has a formal charge of 0, the other two O atoms have a formal charge of -1 each, P has a formal charge of +1, and F has a formal charge of 0.
3. P is double bonded to the third O, single bonded to the other two O atoms, and single bonded to F. The O atom with a double bond has a formal charge of 0, the other two O atoms have a formal charge of -1 each, P has a formal charge of +1, and F has a formal charge of 0.
4. P is single bonded to all three O atoms and single bonded to F. One O atom has a formal charge of 0, the other two O atoms have a formal charge of -1 each, P has a formal charge of +1, and F has a formal charge of -1.
These four resonance structures show the distribution of electrons and formal charges for the [tex]PO_3F^2^-[/tex] ion, illustrating its resonance stabilization.
For more question on resonance structures
https://brainly.com/question/419650
#SPJ11
How could you use iron oxide to prepare iron nitrate?
Iron oxide can be reacted with nitric acid to prepare iron nitrate. This reaction involves the displacement of hydrogen ions in nitric acid by iron ions in iron oxide, leading to the formation of iron nitrate and water.
To use iron oxide to prepare iron nitrate, you can follow these steps:
1. Begin with iron oxide (Fe₂O₃), which is a compound consisting of iron and oxygen.
2. Dissolve the iron oxide in a strong acid, such as concentrated nitric acid (HNO₃). This reaction will produce iron nitrate (Fe(NO₃)₃) and water as byproducts. The chemical equation for this reaction is:
2Fe₂O₃ + 6HNO₃ → 4Fe(NO₃)₃ + 3H₂O
3. After the reaction is complete, you can separate the iron nitrate from the remaining mixture by filtration or evaporation. The iron nitrate can then be collected in a crystalline form for further use.
By following these steps, you can successfully use iron oxide to prepare iron nitrate.
Learn more about iron oxide at https://brainly.com/question/11801757
#SPJ11
The Ksp of nickel hydroxide =6.0×10−16 M.
You may want to reference(Pages 744 - 750) Section 17.5 while completing this problem.
1.) Calculate the molar solubility of Ni(OH)2 when buffered at pH= 8.0.
Express your answer using one significant figure.
2.) Calculate the molar solubility of Ni(OH)2 when buffered at pH= 10.3.
Express your answer using one significant figure.
3.) Calculate the molar solubility of Ni(OH)2 when buffered at pH= 11.9.
the molar solubility of Ni(OH)2 when buffered at pH 8.0, 10.3, and 11.9 is approximately 3.9×10^-6 M in all cases.
The solubility of Ni(OH)2 depends on the pH of the solution because it can undergo acid-base reactions according to the following equilibrium:
Ni(OH)2(s) + 2 H2O(l) ⇌ Ni(OH)2(aq) + 2 OH^-(aq)
1. At pH 8.0, the solution is slightly basic, so we can assume that the hydroxide ion concentration is 10^-6 M.
The solubility product expression for Ni(OH)2 is:
Ksp = [Ni2+][OH^-]^2
Since the solution is buffered at pH 8.0, we can assume that the concentration of Ni2+ is negligible compared to the concentration of OH^-.
Therefore, [OH^-]^2 = Ksp = 6.0×10^-16 M^3
[OH^-] = sqrt(Ksp) = 7.7×10^-6 M
The molar solubility of Ni(OH)2 is half the hydroxide ion concentration, or 3.9×10^-6 M.
2. At pH 10.3, the hydroxide ion concentration is 10^-4.7 M.
[OH^-]^2 = Ksp = 6.0×10^-16 M^3
[OH^-] = sqrt(Ksp) = 7.7×10^-6 M
The excess hydroxide ion concentration is:
[OH^-] - 10^-4.7 M = -7.6×10^-6 M
Since the excess hydroxide ion concentration is small compared to the total concentration of OH^-, we can assume that the concentration of Ni2+ is negligible compared to the concentration of OH^-.
The molar solubility of Ni(OH)2 is half the hydroxide ion concentration, or 3.9×10^-6 M.
3. At pH 11.9, the hydroxide ion concentration is 10^-3.1 M.
[OH^-]^2 = Ksp = 6.0×10^-16 M^3
[OH^-] = sqrt(Ksp) = 7.7×10^-6 M
The excess hydroxide ion concentration is:
[OH^-] - 10^-3.1 M = -9.9×10^-6 M
Since the excess hydroxide ion concentration is small compared to the total concentration of OH
^-, we can assume that the concentration of Ni2+ is negligible compared to the concentration of OH^-.
The molar solubility of Ni(OH)2 is half the hydroxide ion concentration, or 3.9×10^-6 M.
Therefore, the molar solubility of Ni(OH)2 when buffered at pH 8.0, 10.3, and 11.9 is approximately 3.9×10^-6 M in all cases.
Visit to know more about solubility:-
https://brainly.com/question/23946616
#SPJ11
14. Lab Analysis: You forgot to label your chemicals and do not know whether your unknown solution is strontium nitrate or magnesium nitrate. You use the solutions potassium carbonate and potassium sulfate in order to determine your mistake. unknown + potassium carbonate & unknown + potassium sulfate . Write the complete balanced molecular equation(s) below of the reaction(s) that occurred, including the states of matter. HINT: Try writing ALL possible reactions that could have been created, and then decide which reactions actually occurred.
Unknown + Potassium Carbonate → Potassium Nitrate + Unknown Carbonate
[tex]Sr(NO_3)_2[/tex] + [tex]K_2CO_3[/tex] → [tex]2KNO_3[/tex] + [tex]SrCO_3[/tex] (if the unknown is strontium nitrate)
[tex]Mg(NO_3)_2[/tex]+ [tex]K_2CO_3[/tex] → [tex]2KNO_3[/tex] + [tex]MgCO_3[/tex] (if the unknown is magnesium nitrate)
Here are the balanced molecular equations for the reactions that could have occurred between the unknown solution (either strontium nitrate or magnesium nitrate) and potassium carbonate and potassium sulfate: Unknown + potassium carbonate → potassium nitrate + magnesium or strontium carbonate (depending on the unknown)
Unknown + potassium sulfate → potassium nitrate + magnesium or strontium sulfate (depending on the unknown)
Unknown + Potassium Sulfate → Potassium Nitrate + Unknown Sulfate
[tex]Sr(NO_3)_2[/tex] + [tex]K_2SO_4[/tex] → [tex]2KNO_3[/tex] + [tex]SrSO_4[/tex] (if the unknown is strontium nitrate)
[tex]Mg(NO_3)_2[/tex] + [tex]K_2SO_4[/tex] → [tex]2KNO_3[/tex] + [tex]MgSO_4[/tex] (if the unknown is magnesium nitrate)
To determine which reaction occurred, you would need to observe which products were formed. If [tex]SrCO_3[/tex] or [tex]SrSO_4[/tex] were formed, then the unknown was strontium nitrate.
If [tex]MgCO_3[/tex] or [tex]MgSO_4[/tex] were formed, then the unknown was magnesium nitrate.
For more such questions on magnesium, click on:
https://brainly.com/question/30333465
#SPJ11
The Haber Process involves nitrogen gas combining with hydrogen gas to produce ammonia. If 11. 0 grams of nitrogen gas combines with 2. 0 grams of hydrogen gas, find the following: the molar mass of reactants and products, the limiting reactant, the excess reactant, the amount of ammonia produced, the amount of excess chemical not used in the reaction. Nitrogen gas + hydrogen gas ↔ ammonia gas N2 + H2 -> NH3 (Make sure to balance the chemical equation first)
28. 014 grams/mole
17. 031 grams/mole
1. 736 grams
11. 26 grams
Nitrogen Gas
2. 012 grams/mole
Hydrogen Gas
1.
The excess reactant (reagent).
2.
The limiting reactant (reagent).
3.
The amount of excess reagent not used in the reaction.
4.
The molar mass of hydrogen.
5.
The molar mass of ammonia.
6.
The molar mass of nitrogen gas.
7.
The amount of product produced.
(Fill in blank)
Nitrogen gas ([tex]N_2[/tex]) has a molar mass of 28.02 g/mol, while hydrogen gas ([tex]H_2[/tex]) has a molar mass of 2.02 g/mol. Ammonia ([tex]NH_3[/tex]) has a molar mass of 17.03 g/mol.
We must calculate the moles of each reactant in order to identify the limiting reactant. We may determine that there are 5.0 moles of [tex]N_2[/tex] and 1.0 moles of [tex]H_2[/tex] based on the stated masses. The reaction is described by the balanced chemical equation [tex]N_2 + 3H_2 2NH_3[/tex], which indicates that 1 mole of [tex]N_2[/tex] reacts with 3 moles of [tex]H_2[/tex]. As a result, [tex]H_2[/tex] is the limiting reactant and there will be an excess reactant of 2.0 - (1.0/3) = 1.67 grams of [tex]H_2[/tex].
To know more about Nitrogen gas, here
brainly.com/question/11426882
#SPJ4
--The complete Question is, What is the molar mass of nitrogen gas, hydrogen gas, and ammonia in the Haber Process? Given that 11.0 grams of nitrogen gas and 2.0 grams of hydrogen gas are available, which reactant is the limiting reactant? What is the amount of excess reactant left over after the reaction?--
1 point
for the reaction represented by the equation 2na + 2h20 -> 2naoh + h2,
how many grams of sodium hydroxide are produced from 68.97g of sodium with an excess of water?
o a 40.00 g
b. 80.00 g
c. 120.0 g
d. 240.0 g
The answer is 120.0 g of sodium hydroxide are produced. The correct answer is option c.
The balanced equation for the reaction is:
[tex]2 Na + 2 H2O → 2 NaOH + H2[/tex]
From the equation, it can be seen that 2 moles of NaOH are produced for every 2 moles of Na that react. Therefore, the number of moles of NaOH produced can be calculated as follows:
moles of NaOH = moles of Na = mass of Na / molar mass of Na
molar mass of Na = 22.99 g/mol
moles of NaOH = 68.97 g / 22.99 g/mol = 3.00 mol
So, 3.00 moles of NaOH are produced. To convert to grams, we can use the molar mass of NaOH:
molar mass of NaOH = 40.00 g/mol
mass of NaOH = moles of NaOH x molar mass of NaOH
mass of NaOH = 3.00 mol x 40.00 g/mol = 120.00 g
Therefore, the answer is (c) 120.0 g of sodium hydroxide are produced.
To know more about sodium hydroxide refer to-
https://brainly.com/question/29327783
#SPJ11
Consider what happens when the strong acid, nitric acid (hno3), reacts with water.
a) write the balanced equation for the ionization reaction. (there are two ways to write it.)
b) write the two expressions for ka.
c) what can we say about the size of ka for this reaction?
a) The ionization reaction of nitric acid (HNO₃) with water can be written in two different ways:
HNO₃ + H₂O → H₃O⁺ + NO₃⁻
or
HNO₃ + H₂O ⇌ H⁺ + NO₃⁻ + H₂O
Both equations are balanced.
b) The two expressions for the acid dissociation constant (Ka) can be derived from the two equations above:
Ka = [H₃O⁺][NO₃⁻] / [HNO₃]
or
Ka = [H⁺][NO₃⁻] / [HNO₃]
c) Nitric acid is a strong acid, meaning that it fully dissociates in water. As a result, the concentration of HNO3 in the equation is very low, making the Ka value very large. In fact, the Ka value for nitric acid is around 24, which is significantly higher than the Ka values for weak acids. This indicates that nitric acid is a very strong acid.
Let us learn more about this.
a) Ionization reaction - The ionization reaction refers to the process in which a molecule or compound dissociates into ions when it comes into contact with a solvent such as water. In the case of nitric acid (HNO₃), when it is added to water, it ionizes to produce hydronium ions (H₃O⁺) and nitrate ions (NO₃⁻), which is represented by the following balanced equation: HNO₃ + H₂O -> H₃O⁺ + NO₃⁻
b) Ka - To define Ka, we need to first understand that it is the equilibrium constant for the ionization reaction, which indicates the strength of an acid. Specifically, Ka measures the extent to which an acid dissociates in water, which can be expressed as the following two equations: Ka = [H₃O⁺][NO₃⁻]/[HNO₃] Ka = [H⁺][NO₃⁻]/[HNO₃] where [H₃O⁺] and [H⁺] represent the concentration of hydronium ions, and [NO₃⁻] and [HNO₃] represent the concentration of nitrate ions and nitric acid, respectively.
c) As nitric acid is a strong acid, it dissociates completely in water, meaning that the concentration of H₃O⁺ and NO₃⁻ ions will be high compared to the concentration of undissociated HNO₃. Therefore, the value of Ka for this reaction will be very large, indicating that nitric acid is a strong acid with a high degree of ionization.
Learn more about Ka at https://brainly.com/question/31432380
#SPJ11
4NH3+6NO --> 5N2 + 6H20
How many liters of NH3 at 32. 6 °C and 4. 25 kPa are needed to react
completely with 30. 0L of NO at STP?
According to the question 19.2 liters of NH3 at 32.6°C and 4.25 kPa is required to react completely with 30.0L of NO at STP.
What is STP?STP (Standard Temperature and Pressure) is an important concept in the physical sciences. It is the reference state for temperature and pressure in which most measurements are made. In chemistry, STP is used as a reference state for calculating the physical properties of various substances. It is also used in thermodynamics to calculate the physical state of a system. STP is defined as 0 °C (273.15 K) and a pressure of 1 atmosphere (101.325 kPa).
According to the balanced equation, for every 6 moles of NO, 5 moles of NH3 is required. Therefore, we need to calculate the number of moles of NO first.
1 mole of gas at STP occupies 22. 4 liters, so 30.0 liters of NO at STP is equal to 30.0/22.4 = 1.34 moles of NO.
Since we need 5 moles of NH3 for every 6 moles of NO, we need 5/6 x 1.34 = 1.12 moles of NH3.
At 32.6°C and 4.25 kPa, 1 mole of NH3 occupies 17.1 liters, so 1.12 moles of NH3 is equal to 1.12 x 17.1 = 19.2 liters of NH3.
Therefore, 19.2 liters of NH3 at 32.6°C and 4.25 kPa is required to react completely with 30.0L of NO at STP.
To learn more about STP
https://brainly.com/question/27100414
#SPJ4
From the following data, determine the order of the reaction in ligand and substrate, and write the rate equation.
[substrate] (m) [ligand] (m) rate (ms^-1)
5 1.0 1.0
5.0 10.0 25
1.0 200 2.0
find the msds for decahydronaphthalene.
The order of the reaction in ligand is zeroth order, as changing the ligand concentration from 1.0 mM to 200 mM does not affect the reaction rate. The rate equation is: rate = k[substrate], where k is the rate constant.
The order of the reaction in substrate is first order, as doubling the substrate concentration (from 5 mM to 10 mM) leads to a doubling of the reaction rate so the or.
To find the MSDS for decahydronaphthalene, one can search for it on the website of the manufacturer or supplier. Alternatively, one can search for it on the website of the National Institute for Occupational Safety and Health (NIOSH), which provides a database of MSDSs for various chemicals.
It is important to consult the MSDS before handling or using the chemical, as it contains information on its physical and chemical properties, hazards, and precautions for safe use and disposal.
To know more about rate constant click on below link:
https://brainly.com/question/31742254#
#SPJ11
How many total electrons are transferred during the reaction of the oxidation of chromium
metal according to the following reaction?
4Cr(s) + 302(g)
-->
2Cr2O3(s)
O4 electrons
6 electrons
8 electrons
O2 electrons
In the reaction of the oxidation of chromium, 4 chromium atoms each lose 3 electrons to become positively charged ions, and 3 oxygen molecules each gain 4 electrons to become negatively charged ions. This means that a total of 12 electrons are transferred in the oxidation of chromium.
The oxidation of chromium can be broken down into two half-reactions:
1) The oxidation of chromium:
4Cr(s) --> 4Cr³⁺(aq) + 12e-
In this half-reaction, each
chromium atom loses 3 electrons to become a positively charged ion (Cr³⁺), and a total of 12 electrons are
transferred
.
2) The reduction of oxygen:
3O₂(g) + 12e- --> 6O²⁻(aq)
In this half-reaction, each oxygen molecule gains 4 electrons to become a negatively charged ion (O²⁻), and a total of 12 electrons are transferred.
Therefore, the total number of electrons transferred during the reaction of the oxidation of chromium is 12. It is important to note that this reaction involves the transfer of O₂ electrons, not O₄ electrons.
Learn more about "oxidation of chromium" https://brainly.com/question/31860895 #SPJ11
ASAP Big test
Question 7 (1 point)
Saved
The subscript numbers in covalent compounds can be determined by_____
Question 7 options:
the number of the column in which the element is found
the addition of the charges on each metal
the prefixes used in the written name of the compound
subtraction of the charges on the metal
The subscript numbers in covalent compounds can be determined by the prefixes used in the written name of the compound.
Covalent compounds are formed by the sharing of electrons between atoms, and their names are derived from the prefixes used to indicate the number of each type of atom in the compound.
The prefix indicates the number of atoms of each element, and the second element is given an "-ide" ending. For example, carbon dioxide has one carbon atom and two oxygen atoms, and is written as CO₂. The prefix "di" indicates two atoms of oxygen, and the subscript "2" indicates that there are two oxygen atoms.
Similarly, dinitrogen trioxide has two nitrogen atoms and three oxygen atoms, and is written as N₂O₃. The prefix "di" indicates two nitrogen atoms, and the prefix "tri" indicates three oxygen atoms, thus leading to the correct subscript numbers.
To know more about Covalent compounds, refer here:
https://brainly.com/question/11632372#
#SPJ11
What is it called when a disease can affect plants and animals and can cause them to struggle to survive?
G Trehalose, C12H22O11, is a nonreducing sugar that is only 45% as sweet as sugar. When hydrolyzed by aqueous acid or an alpha-glucosidase, it forms only D-glucose. When it is treated with excess methyl iodide in the presence of Ag2O and then hydrolyzed with water under acidic conditions, only 2,3,4,6-tetra-O-methyl-D-glucose is formed. Complete the structure of trehalose
The structure of trehalose can be determined based on its chemical formula, [tex]C12H22O11[/tex], and the fact that it only forms D-glucose upon hydrolysis.
Trehalose is a disaccharide composed of two glucose molecules linked by an alpha-1,1 glycosidic bond. This means that the glucose molecules are joined together through their first and first carbon atoms, respectively. The structure can be written as:
[tex]HOCH2(CHOH)4α-D-Glc-(1→1)-α-D-Glc-CH2OH[/tex]
where [tex]"α-D-Glc"[/tex] represents a glucose molecule in its alpha configuration.
To visualize the structure, we can draw it in a condensed form, where the two glucose molecules are shown connected by a straight line:
[tex]HOCH2(CHOH)4α-D-Glc-(1→1)-α-D-Glc-CH2OH[/tex]
To know more about chemical formula refer to-
https://brainly.com/question/31713710
#SPJ11
