The answer is 120.0 g of sodium hydroxide are produced. The correct answer is option c.
The balanced equation for the reaction is:
[tex]2 Na + 2 H2O → 2 NaOH + H2[/tex]
From the equation, it can be seen that 2 moles of NaOH are produced for every 2 moles of Na that react. Therefore, the number of moles of NaOH produced can be calculated as follows:
moles of NaOH = moles of Na = mass of Na / molar mass of Na
molar mass of Na = 22.99 g/mol
moles of NaOH = 68.97 g / 22.99 g/mol = 3.00 mol
So, 3.00 moles of NaOH are produced. To convert to grams, we can use the molar mass of NaOH:
molar mass of NaOH = 40.00 g/mol
mass of NaOH = moles of NaOH x molar mass of NaOH
mass of NaOH = 3.00 mol x 40.00 g/mol = 120.00 g
Therefore, the answer is (c) 120.0 g of sodium hydroxide are produced.
To know more about sodium hydroxide refer to-
https://brainly.com/question/29327783
#SPJ11
N2 + 3H2 + 2NH3
If 15L of hydrogen gas is available for the Reaction above, what volume of NH3 will be formed
The volume of NH₃ that will be formed is determined as 10.1 L.
What is the volume of the gas?The volume of NH₃ formed is calculated by applying ideal gas law as follows;
PV = nRT
where;
P is the pressureV is the volumen is the number of molesR is the gas constantT is the temperature.[tex]n = \frac{PV}{RT}\\\\n = \frac {(1 \ atm)(15\ L)}{(0.0821 \ L atm/mol. K)(273 \ K)}[/tex]
n = 0.67 moles of H₂
The number of moles of NH₃ is calculated as;
n(NH₃) = (2/3) n(H₂)
= (2/3) (0.67 mol)
= 0.45 mol
The volume of NH₃ gas is calculated as;
[tex]n(NH_3) = \frac{PV}{RT} \\\\V(NH_3) = \frac{n(NH_3)RT}{P}[/tex]
[tex]= \frac{(0.45 \ mol)(0.0821 \ L atm/mol .K)(273\ K)}{(1 \ atm) }[/tex]
= 10.1 L
Learn more about volume of gas here: https://brainly.com/question/25736513
#SPJ1
Air enters the body through the ________ and travels down the ________ to the lungs. the ______ contracts to allow space for the _________ to take in air. then, the ______ relaxes causing the _____ to release air.
Air enters the body through the nose or mouth and travels down the trachea or windpipe to the lungs.
The diaphragm contracts to allow space for the lungs to take in air. Then, the diaphragm relaxes causing the lungs to release air.
To know more about body refer here
https://brainly.com/question/31590177#
#SPJ11
If you needed to make 2. 5 L of a 0. 2 M fruit drink solution from the 0. 7 M drink solution, how would you do it? (Hint: Use McVc = MdVd to find the amount of concentrated solution you need, then add water to reach 2. 5 L. )
The volume of the fruit drink comes out to be 0.712 L which is calculated in the below section.
Using the dilution law,
M1 V1 = M2 V2......(1)
Here, M represents the molarity and V represents the volume.
The given parameters are as follows-
M1 = 0.2 M
V1 = 2.5 L
M2 = 0.7 M
To calculate the volume of the fruit drink after dilution, substitute the known values in equation (1) as follows-
0.2 M x 2.5 L = 0.7 M x V2
V2 = (0.2 M x 2.5 L) / 0.7 M
= 0.5 / 0.7 L
= 0.7142 L
The volume comes out to be 0.712 L.
To learn more about molarity check the link below-
https://brainly.com/question/30404105
#SPJ4
which statement describes an experimental step(s) that is necessary to determine the molar mass using the freezing point depression method? measure the heat of fusion of the pure solvent and then measure the heat of fusion of the pure solute. measure the freezing point of the pure solvent and then measure the freezing point of the solution. determine the molar mass of the solute by looking up the elements in the periodic table. calculate the number of moles in a kilogram of solvent to determine its molality.
The experimental step necessary to determine the molar mass using the freezing point depression method is to measure the freezing point of the pure solvent and then measure the freezing point of the solution. The statement 2 is correct.
The freezing point depression method is a common technique used to determine the molar mass of a solute dissolved in a solvent. The method is based on the principle that the presence of a solute lowers the freezing point of the solvent. By measuring the change in the freezing point of the solvent caused by the solute, it is possible to calculate the molar mass of the solute. Correct answer is option 2.
To know more about freezing point, here
brainly.com/question/31357864
#SPJ4
--The complete Question is, which statement describes an experimental step(s) that is necessary to determine the molar mass using the freezing point depression method?
1. measure the heat of fusion of the pure solvent and then measure the heat of fusion of the pure solute.
2. measure the freezing point of the pure solvent and then measure the freezing point of the solution.
3. determine the molar mass of the solute by looking up the elements in the periodic table. 4. calculate the number of moles in a kilogram of solvent to determine its molality. --
What is the pH of a solution that is 0. 17M HA and 0. 50M A-. Ka HA=2. 87x10-9
The pH of a solution that is 0.17M HA and 0.50M A- can be calculated using the Henderson-Hasselbalch equation. This equation states that the pH of a solution is equal to the pKa of the acid plus the log of the ratio of the conjugate base to the acid.
In this case, the pKa of HA is 2.87x10-9, and the ratio of A- to HA is 0.50/0.17 which is roughly 2.94. Therefore, the pH of this solution is 2.87x10-9 + log(2.94) = -6.53.
To arrive at this result, the equation takes into account the fact that HA is the acid and A- is the conjugate base. HA donates a proton to A- in aqueous solution, forming the HA- and A2- ions.
The ratio of A- to HA is a measure of the amount of protonation that has occurred, and the pKa is the pH at which the protonation is equal. The Henderson-Hasselbalch equation shows us how the ratio of conjugate base to acid affects this equilibrium, allowing us to calculate the pH of the solution.
Know more about Henderson-Hasselbalch equation here
https://brainly.com/question/13423434#
#SPJ11
What substituent(s) might you add to convert benzoic acid into a very strong acid? Draw its structure and explain your reasoning
To convert benzoic acid into a very strong acid, you can add electron-withdrawing substituents like nitro groups (-NO₂) to the aromatic ring. These substituents increase the acidity of the carboxylic acid group by stabilizing the negative charge on the conjugate base, the benzoate ion.
Let us discuss this in detail.
1. Add a nitro group (-NO₂) as a substituent to the aromatic ring of benzoic acid. You can add more than one nitro group to further increase acidity.
2. The electron-withdrawing nature of the nitro group stabilizes the negative charge on the conjugate base (benzoate ion) by delocalizing the negative charge through resonance.
3. As a result, the equilibrium between benzoic acid and its conjugate base shifts towards the conjugate base, making the modified benzoic acid a stronger acid.
The structure of the modified benzoic acid with a nitro group at the ortho or para position is as follows:
O
||
-C₆H₄-NO₂-C-O-H
Remember, adding more electron-withdrawing substituents like nitro groups will further increase the acidity of the benzoic acid derivative.
Learn more about benzoic acid at https://brainly.com/question/29751745
#SPJ11
Read the given passage and answer the questions: A-D that follow: An electrochemical cell (Daniell cell) is set-up by using Silver metal rod and Copper metal rod along with silver nitrate aqueous solution and copper sulphate aqueous solution are used as electrolyte. The circuit is completed inside the cell by migration of ions through the salt bridge. It may be noted that the direction of current is opposite to the direction of electron flow. Given E of Ag/Ag-0.80V and E" of Ca/Cu-034V A. Calculate Eo cell. Which of the electrode is negatively charged. C. Write individual reaction at each electrode. D. Write the cell reaction
(A) Eo cell for the given electrochemical cell is -1.14V. (B) The electrode that is negatively charged is the anode, which is made up of copper (Cu). (C) At the cathode (Ag electrode): Ag⁺ + e⁻ → Ag
At the anode (Cu electrode): Cu → Cu²⁺+ 2e⁻
(D) Overall reaction: 2Ag⁺ + Cu → 2Ag + Cu²⁺
What is electrochemical cell?An electrochemical cell, also known as a voltaic cell or a galvanic cell, is a device that generates electrical energy from a chemical reaction. It consists of two electrodes, a positive electrode (anode) and a negative electrode (cathode), that are immersed in an electrolyte solution that contains ions.
A. To calculate Eo cell, we can use the formula:
Eo cell = Eo cathode - Eo anode
where Eo cathode is the standard reduction potential of the cathode and Eo anode is the standard reduction potential of the anode.
From the given information, Eo of Ag/Ag is -0.80V (since it's a reduction potential, we need to reverse the sign to get the oxidation potential) and Eo of Cu/Cu is 0.34V. Since Ag is the cathode and Cu is the anode in this cell, we can plug in the values and get:
Eo cell = Eo cathode - Eo anode
Eo cell = (-0.80V) - (0.34V)
Eo cell = -1.14V
Therefore, the Eo cell for the given electrochemical cell is -1.14V.
B. The electrode that is negatively charged is the anode, which is made up of copper (Cu).
C. The individual reactions at each electrode are:
At the cathode (Ag electrode):
Ag⁺ + e⁻ → Ag
At the anode (Cu electrode):
Cu → Cu²⁺ + 2e⁻
D. The overall cell reaction can be obtained by combining the individual reactions at the cathode and anode. Since there are two electrons involved in the anode reaction, we need to multiply the cathode reaction by 2 so that the electrons cancel out in the overall reaction:
2Ag⁺ + 2e⁻ → 2Ag (cathode)
Cu → Cu²⁺ + 2e⁻ (anode)
Overall reaction:
2Ag⁺ + Cu → 2Ag + Cu²⁺
Learn more about cathode here:
https://brainly.com/question/4052514
#SPJ9
Write your answer to the following prompt within the space provided. Be sure to answer all parts.
Prompt:
In the 1970’s, Benjamin Stacey was born with methemoglobinemia (rr). Neither of Benjamin’s parents were affected by the genetic condition and none of his three siblings showed signs of blue skin, lips, or nails. Since this condition is passed down by genetic traits, his mother was genetically tested and was determined to have a heterozygous genotype (Rr) for methemoglobinemia.
Part A: Determine the genotype for his father and possible genotypes for his three siblings. Provide a brief explanation of your reasoning.
Part B: If Benjamin Stacey were to marry and have children with a woman affected by methemoglobinemia, predict the probability of their children inheriting this condition. Provide a brief explanation of your reasoning
The probability of Benjamin Stacey's children inheriting methemoglobinemia from a woman affected by the condition depends on her genotype.
If she is homozygous recessive (rr), all of their children will have methemoglobinemia.
If she is heterozygous (Rr), there is a 50% chance of each child inheriting the mutated gene and developing methemoglobinemia.
Part A:
Since Benjamin's mother has a heterozygous genotype (Rr) for methemoglobinemia and neither of his siblings showed signs of the condition, we can infer that his father must have a normal genotype (RR) for the methemoglobinemia gene.
The possible genotypes for Benjamin's three siblings are:
Rr (heterozygous carriers)
RR (normal)
rr (affected by methemoglobinemia)
This is because each sibling inherits one gene from each parent, and there is a 50% chance that they will inherit the normal gene (R) from their father and a 50% chance that they will inherit the mutated gene (r) from their mother.
Part B:
If Benjamin Stacey were to marry and have children with a woman affected by methemoglobinemia, the probability of their children inheriting this condition depends on the genotype of the woman.
If the woman is homozygous recessive (rr) for the methemoglobinemia gene, then all of their children will inherit one mutated gene (r) from Benjamin and one mutated gene (r) from the woman, resulting in an rr genotype and the development of methemoglobinemia.
The probability of each child having methemoglobinemia would be 100%.
If the woman is heterozygous (Rr) for the methemoglobinemia gene, then there is a 50% chance that each child will inherit one normal gene (R) from Benjamin and one mutated gene (r) from the woman, resulting in a heterozygous genotype (Rr) and carrier status.
There is also a 50% chance that each child will inherit two mutated genes (rr) and develop methemoglobinemia. The probability of each child having methemoglobinemia would be 50%.
to know more about methemoglobinemia refer here:
https://brainly.com/question/21994048#
#SPJ11
How many grams of table salt are made from the synthesis reaction of chlorine gas and 400 grams of sodium metal?
The synthesis reaction of chlorine gas (Cl2) and sodium metal (Na) results in the formation of table salt, which is sodium chloride (NaCl). To determine the amount of sodium chloride produced, we need to consider the stoichiometry of the reaction.
To determine how many grams of table salt are made from the synthesis reaction of chlorine gas and 400 grams of sodium metal, follow these steps:
1. Write the balanced chemical equation for the reaction:
2Na + Cl2 = 2NaCl
2. Calculate the molar mass of sodium (Na) and table salt (NaCl):
Na = 22.99 g/mol
NaCl = 22.99 g/mol (Na) + 35.45 g/mol (Cl) = 58.44 g/mol
3. Calculate the moles of sodium metal:
moles of Na = 400 g/22.99 g/mol = 17.40 moles
4. According to the balanced equation, 2 moles of Na produce 2 moles of NaCl. Therefore, the moles of NaCl produced are the same as the moles of Na used:
moles of NaCl = 17.40 moles
5. Calculate the mass of NaCl produced:
mass of NaCl = moles of NaCl molar mass of NaCl = 17.40 moles 58.44 g/mol = 1,016.26 g
Your answer: In the synthesis reaction of chlorine gas and 400 grams of sodium metal, 1,016.26 grams of table salt are produced.
Learn more about "table salt": https://brainly.com/question/24858516
#SPJ11
Hurry!!!!!! help pleaseee i reallllyyyy need help
1. you may recall that the products of the complete combustion of a hydrocarbon are water vapor and carbon dioxide gas. write the balanced equation showing the combustion of methane. do not forget to include the states of matter of the reactants and the products. hint: methane is a gas at standard temperature and pressure. (2pts)
balanced equation:
ch4(g)+202(g) -> co2(g)+2h2o(g)
to begin the experiment, 1.65g of methane ch4 is burned in a bomb calorimeter containing 1000 grams of water. the initial temperature of water is 18.98oc. the specific heat of water is 4.184 j/g oc. the heat capacity of the calorimeter is 615 j/ oc . after the reaction the final temperature of the water is 36.38oc.
2. calculate the change in temperature, δt. show your work. (1pt)
3. calculate the heat absorbed by water. use the formula qwater = m • c • δt
show your work (2pts)
4.calculate the heat absorbed by the calorimeter. use the formula:
qcal = ccal • δt show your work. (2pts)
5. the total heat absorbed by the water and the calorimeter can be calculated by adding the heat calculated in steps 3 and 4. the amount of heat released by the reaction is equal to the amount of heat absorbed with the negative sign as this is an exothermic reaction. (2pts)
a.using the formula δh = - (qcal + qwater ) , calculate the total heat of combustion. show your work.
b. convert heat of combustion (answer from part a) from joules to kilojoules. show your work.
6. evaluate the information contained in this calculation and complete the following sentence: (2pts)
this calculation shows that burning _______ grams of methane [takes in] / [gives off] energy (choose one).
7. the molar mass of methane is 16.04 g/mol. calculate the number of moles of methane burned in the experiment. show your work. (2pts)
8. what is the experimental molar heat of combustion in kj/mol? show your work. (2pts)
9. the accepted value for the heat of combustion of methane is -890 kj/mol . explain why the experimental data might differ from the theoretical value in 2-3 complete sentences. (2pts)
10. given the formula:
% error= |(theoretical value - experimental value)/theoretical value)| x 100
calculate the percent error. show your work. (2pts)
11. a 29.7 gram piece of aluminum is sitting on a hot plate. a student accidentally left the hot plate on. the aluminum now is very hot and has to be cooled. you fill a beaker with 250 grams of water. the aluminum is placed in the water. you are curious so you place a thermometer in the beaker. the water warms from 22.3 c to 30.8 c. the c (aluminum) is 0.900 j/gc, and the c (water) is 4.18 j/gc
do you have enough information to calculate the amount of energy transferred in this situation? explain in 2-3 complete sentences. (1pt)
Yes, there is enough information to calculate the amount of energy transferred in this situation. The heat energy transferred from the aluminum to the water is calculated by using the equation q = m•c•δt.
In this equation, q is the amount of heat energy transferred, m is the mass of the object, c is the specific heat capacity of the object and δt is the change in temperature of the object.
Knowing the mass of the aluminum and its specific heat capacity, as well as the change in temperature of the water, it is possible to calculate the amount of heat energy transferred from the aluminum to the water.
This will give an indication of the amount of energy that was released from the aluminum in this situation.
Know more about Aluminum here
https://brainly.com/question/9496279#
#SPJ11
When oxygen accepts electrons, water is produced as a byproduct.
When oxygen accepts electrons, water is not always produced as a byproduct. It depends on the specific chemical reaction that is occurring.
In some reactions, such as the process of respiration in living organisms, oxygen accepts electrons and combines with hydrogen ions (protons) to form water as a byproduct. This reaction can be written as:
[tex]O2 + 4e- + 4H+ → 2H2O[/tex]
In this reaction, oxygen accepts four electrons and four hydrogen ions to form two molecules of water.
However, in other reactions, oxygen can accept electrons and form other byproducts. For example, in combustion reactions, oxygen reacts with hydrocarbons to form carbon dioxide and water. The specific reaction that occurs depends on the reactants and conditions involved.
To know more about chemical reaction refer to-
https://brainly.com/question/29039149
#SPJ11
How many lead atoms are present in a piece of lead of volume 1. 907 cm?
Useful data:
The density of Pb = 11. 34 g. Cm-3.
Avogadro's Number (NA) = 6. 022x1023 atoms. Mol-1
Give your answer to 3 significant figures
Giving your answer with specific significant figures. Use 'e' notation for powers of ten:
for example for 1. 23 x 104, enter 1. 23e4
for example for 6. 022 x 1023, enter 6. 022e23
for example for 1. 23 x 10-6, that is 0. 00000123, enter 1. 23e-6
note no gaps
The number of lead atoms in a piece of lead with a volume of 1.907 cm³ is 1.54e22 atoms.
To find this, follow these steps:
1. Calculate the mass of the lead piece using its volume and density: mass = volume x density = 1.907 cm³ x 11.34 g/cm³ = 21.61 g.
2. Determine the molar mass of lead (Pb): 207.2 g/mol.
3. Calculate the number of moles of lead in the piece: moles = mass/molar mass = 21.61 g / 207.2 g/mol = 0.104 mol.
4. Use Avogadro's number to find the number of atoms: atoms = moles x Avogadro's number = 0.104 mol x 6.022e23 atoms/mol = 1.54e22 atoms.
So, there are 1.54e22 lead atoms in the given piece of lead.
To know more about Avogadro's number click on below link:
https://brainly.com/question/28812626#
#SPJ11
6. determine the molar mass of an unknown gas that has a volume of 72.5 ml at a temperature of
68.0°c, and a pressure of 0.980 atm, and a mass of 0.207 g.
(hint: find moles first and remember that molar mass is the mass per mole")
The number of moles in the gas is 0.00262 mol and the molar mass of the unknown gas is 79.0 g/mol.
The volume of gas = 72.5 ml
The temperature of gas = 68.0°c
Pressure = 0.980 atm
Mass = 0.207 g
To calculate the molar mass of the gas, we need to estimate the number of moles using the ideal gas law equation. The formula is:
PV = nRT
The temperature must be converted to Kelvin scale and also volume to Litres.
Volume = 72.5 mL = 0.0725 L
Temperature = 68.0 + 273.15 = 341.15 K
Substituting the values in the equation,
n = PV/RT = (0.980 atm) * [(0.0725 L)/(0.08206 L·atm/mol·K)] * (341.15 K)
n= 0.00262 mol
The molar mass of the gas is calculated as:
molar mass = mass/number of moles
molar mass = 0.207 g / 0.00262 mol
molar mass = 79.0 g/mol
Therefore, we can conclude that the molar mass of the unknown gas is 79.0 g/mol.
To learn more about Molar mass
https://brainly.com/question/22997914
#SPJ4
If your end product is 200. 0 g KMnO4 how much KOH did you start with?
If your end product is 200.0 g KMnO₄, you started with 142.1 g of KOH.
To determine how much KOH you started with if your end product is 200.0 g KMnO₄, you need to perform stoichiometric calculations using the balanced chemical equation. However, you didn't provide the reaction equation. Assuming you're referring to the reaction between MnO₂, KOH, and O₂ to form KMnO₄, the balanced equation is:
2 MnO₂ + 4 KOH + O2 → 2 KMnO₄ + 2 H2O
Here's the step-by-step explanation to find the amount of KOH you started with:
1. Find the molar mass of KMnO₄ and KOH.
KMnO₄: K (39.1 g/mol) + Mn (54.9 g/mol) + 4O (4 x 16.0 g/mol) = 158.0 g/mol
KOH: K (39.1 g/mol) + O (16.0 g/mol) + H (1.0 g/mol) = 56.1 g/mol
2. Calculate the moles of KMnO₄ produced.
moles of KMnO₄ = mass of KMnO₄ / molar mass of KMnO₄
moles of KMnO₄ = 200.0 g / 158.0 g/mol = 1.266 moles
3. Use stoichiometry to find the moles of KOH used.
From the balanced equation, 4 moles of KOH react to form 2 moles of KMnO₄. Therefore:
moles of KOH = (moles of KMnO4 x 4) / 2
moles of KOH = (1.266 moles x 4) / 2 = 2.532 moles
4. Calculate the mass of KOH used.
mass of KOH = moles of KOH x molar mass of KOH
mass of KOH = 2.532 moles x 56.1 g/mol = 142.1 g
So, if your end product is 200.0 g KMnO₄, you started with 142.1 g of KOH.
To know more about molar mass :
https://brainly.com/question/20552052
#SPJ11
What is the mass of an airplane that is flying at 246 m/s and has a momentum of 19,680,000 kg•m/s?
The mass of the airplane is 80,000 kg.
To find the mass of the airplane, we can use the formula for momentum:
momentum = mass x velocity
We are given the momentum of the airplane, which is 19,680,000 kg•m/s, and the velocity, which is 246 m/s.
So, we can rearrange the formula to solve for mass:
mass = momentum / velocity
Plugging in the values we have, we get:
mass = 19,680,000 kg•m/s / 246 m/s
Simplifying this expression gives us:
mass = 80,000 kg
Therefore, the mass of the airplane is 80,000 kg.
To know more about momentum :
https://brainly.com/question/29598011
#SPJ11
Hydrogen chloride gas (hcl) diffuses 1.8 times faster than an unknown gas. determine the molar mass of the unknown gas.
The molar mass of the unknown gas is approximately 11.25 g/mol.
To determine the molar mass of the unknown gas, we can use Graham's Law of Diffusion.
Graham's law states that the rate of diffusion of a gas is inversely proportional to the square root of its molar mass In other words:
Rate of diffusion of gas A / Rate of diffusion of gas B = sqrt(Molar mass of gas B / Molar mass of gas A)
Using the given information, we can set up an equation:
1.8 (rate of diffusion of unknown gas) / 1 (rate of diffusion of HCl) = sqrt(Molar mass of HCl / Molar mass of unknown gas)
Squaring both sides of the equation, we get:
3.24 = Molar mass of HCl / Molar mass of unknown gas
Multiplying both sides by the molar mass of the unknown gas, we get:
Molar mass of unknown gas = Molar mass of HCl / 3.24
The molar mass of HCl is 36.46 g/mol. Plugging this in, we get:
Molar mass of unknown gas = 36.46 g/mol / 3.24
Molar mass of unknown gas = 11.25 g/mol (rounded to two decimal places)
Therefore, the molar mass of the unknown gas is approximately 11.25 g/mol.
Know more about Graham's Law here:
https://brainly.com/question/31488584
#SPJ11
How many molecules of acetyl-CoA result from complete catabolism of the following compounds?
In the complete catabolism of glucose, two molecules of acetyl-CoA are produced. In the complete catabolism of fatty acids, the number of acetyl-CoA molecules produced varies depending on the length of the fatty acid chain.
For example, a 16-carbon fatty acid would produce eight molecules of acetyl-CoA. In the complete catabolism of amino acids, the number of acetyl-CoA molecules produced varies depending on the specific amino acid being catabolized.
Overall, the production of acetyl-CoA is an important step in the cellular respiration process, as it enters the Krebs cycle and eventually leads to the production of ATP.
Understanding the different ways in which acetyl-CoA is produced can provide insight into the metabolism of different types of nutrients and the importance of maintaining a balanced diet.
To know more about fatty acid click on below link:
https://brainly.com/question/30712004#
#SPJ11
Decomposers, such as bacteria, earthworms, and fungi, are not shown in the food web. How do these organisms receive energy?
A.
Decomposers break down the remains of dead plants and animals.
B.
Decomposers use energy from the Sun to make their own food.
C.
Decomposers consume living plants and animals.
D.
Decomposers do not need energy to survive.
Answer:
A
Explanation:
I believe the answer is A as bacteria feeds in a mode of nutrition known as saprophytism
Since Mars has less mass than Earth, the surface gravity on Mars is less than the surface gravity on Earth. The surface gravity on Mars is only about 38% of the surface gravity on Earth, so if you weigh 100 pounds on Earth, how much would you weigh on Mars? How did you figure this out?
If you weigh 100 pounds on Earth, you would weigh approximately 38 pounds on Mars. This is because the gravitational force that you experience on Mars is only about 38% of the gravitational force that you experience on Earth due to the difference in the masses of the two planets.
To figure out how much you would weigh on Mars if you weigh 100 pounds on Earth, we can use the fact that the surface gravity on Mars is approximately 38% of the surface gravity on Earth. This means that your weight on Mars would be 38% of your weight on Earth.
We can start by calculating what 38% of 100 pounds is:
38% of 100 pounds = (38/100) x 100 pounds = 0.38 x 100 pounds = 38 pounds
Hence, if you weigh 100 pounds on Earth, you will weigh around 38 pounds on Mars. Because of the difference in the masses of the two planets, the gravitational force you experience on Mars is only roughly 38% of the gravitational force you experience on Earth.
For more such questions on gravitational force, click on:
https://brainly.com/question/28623512
#SPJ11
How many grams of calcium chloride should be dissolved in 500. 0mL of water to make a 0. 20m solution of calcium chloride?
11.1 grams of calcium chloride should be dissolved in 500. 0mL of water to make a 0. 20 M solution of calcium chloride.
Molarity of a solution is defined as the number of moles of solute present in 1 litre of a solution. 1 mole of any substance is equal to 6.022× 10²³ atoms, ions or molecules present in it.
0.2M means 0.2mol CaCl₂/1L solution.
This question didn't give us a density of the solution so needs an assumption that the solution has equal volume to water.
x mol/0.5L=0.2M
x = 0.1
0.1 mol of CaCl₂ is needed. Ca=40g/mol, Cl=35.5g/mol.
CaCl₂ 0.1mol = (40+35.5×2)×0.1=11.1g
To know more about calcium chloride here
https://brainly.com/question/31427795
#SPJ4
a compound with a molecular weight of 229.61 g/mol was dissolved in 50.0 ml of water. 1.00 ml of this solution was placed in a 10.0 ml flask and diluted to the mark. the absorbance of this diluted solution at 510 nm was 0.472 in a 1.000 cm cuvet. the molar absorptivity of the compound, at 510 nm, is 6,310 m-1 cm-1. calculate the concentration of the compound in the initial 50.0 ml solution.
The concentration of the compound in the initial 50.0 ml solution is 0.0172 g/L.
The concentration of the compound in the initial 50.0 ml solution can be calculated as follows:
First, we need to calculate the absorbance of the 1.00 ml solution in the 10.0 ml flask:
Absorbance = (0.472)(10.0/1.000) = 4.72
Next, we can use the Beer-Lambert Law to calculate the concentration of the compound in the initial solution:
A = εbc
where A is the absorbance, ε is the molar absorptivity, b is the path length (1.000 cm), and c is the concentration in mol/L.
Plugging in the values we have:
4.72 = (6,310 M^-1 cm^-1)(1.000 cm)(c)
Solving for c, we get:
c = 7.48 x 10^-5 mol/L
Finally, we can convert this to the concentration in the initial 50.0 ml solution:
moles of compound = (7.48 x 10^-5 mol/L)(0.0500 L) = 3.74 x 10^-6 mol
mass of compound = (229.61 g/mol)(3.74 x 10^-6 mol) = 0.000859 g
Concentration = mass/volume = 0.000859 g/0.0500 L = 0.0172 g/L
Therefore, the concentration of the compound in the initial 50.0 ml solution is 0.0172 g/L.
To know more about the Solution, here
https://brainly.com/question/16083903
#SPJ4
Green tea has a ph of 8.2 what is the (oh-) and is it acidic or basic
The (OH⁻) concentration in green tea with a pH of 8.2 is 6.31 x 10⁻⁷ M.
This suggests that the solution is slightly basic in nature. pH is a measure of hydrogen ion concentration, and the higher the pH, the lower the hydrogen ion concentration.
This means that in green tea, there are more hydroxide ions than hydrogen ions present, making it a basic solution.
It is important to note that the pH of green tea can vary depending on the brand and preparation method. Nonetheless, overall, green tea is considered a healthy beverage due to its antioxidant properties and potential health benefits.
To know more about pH click on below link:
https://brainly.com/question/2288405#
#SPJ11
what is the unabbreviated electron configuration of oganesson
Answer: 1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p6 5s2 4d10 5p6 6s2 4f14 5d10 6p6 7s2 5f14 6d10 7p6
Explanation:
9. What is the pH of a 0. 25 molar HBz (benzoic acid) solution. Ka HBz=6. 5 x10-5
The pH of a 0.25 molar HBz (benzoic acid) solution is approximately 2.61.
To calculate the pH of the solution, follow these steps:
1. Write the dissociation equation for benzoic acid: HBz ⇌ H⁺ + Bz⁻.
2. Set up an ICE table (Initial, Change, Equilibrium) to determine the equilibrium concentrations of the species involved.
3. Write the expression for Ka: Ka = [H⁺][Bz⁻]/[HBz].
4. Substitute the equilibrium concentrations into the Ka expression and solve for x, representing the [H⁺] concentration.
5. Calculate the pH using the formula: pH = -log[H⁺].
Initial concentrations are [HBz] = 0.25 M, [H⁺] = 0 M, and [Bz⁻] = 0 M. The change in concentration is -x for HBz, +x for H⁺, and +x for Bz⁻. Thus, at equilibrium, [HBz] = 0.25 - x, [H⁺] = x, and [Bz⁻] = x. The Ka expression becomes (6.5 × 10⁻⁵) = x²/(0.25 - x). After solving for x, we find x ≈ 0.00256 M. Finally, pH = -log(0.00256) ≈ 2.61.
To know more about ICE table click on below link:
https://brainly.com/question/30395953#
#SPJ11
How could you prepare the following compound using a starting material that contains no more than three carbons? CH3CH2CHCHCH, with an NH2 group attached to the third (from left to right) carbon, a CH3 group attached to the fourth carbon, and an oxygen atom double-bonded to the fifth carbon
Start with 2-methylpropene ([tex]CH_3CHCH_2CH_3[/tex]) and perform an acid-catalyzed hydration reaction to form 3-methyl-2-butanol ([tex]CH_3CHCH(OH)CH_3[/tex]).
What is hydration?Hydration is the process of providing water to the body and replenishing the fluids lost through physical activity, sweating, or illness. Hydration is essential for our bodies to function properly and also to maintain a healthy lifestyle. Hydration helps our bodies regulate temperature, lubricate and cushion joints, protect organs and tissues, and help to rid our bodies of waste. It is important to stay hydrated by drinking plenty of water throughout the day, especially when out in the heat, exercising, or sick. Additionally, increasing your intake of fruits and vegetables can help to boost hydration, as they contain high amounts of water and electrolytes.
Then perform a nucleophilic substitution reaction with ammonia to form 3-amino-2-methylbutyl alcohol ([tex]CH_3CHCH(NH_2)CH_3[/tex]). Finally, perform a dehydration reaction to form 3-amino-2-methylbut-2-ene [tex](CH_3CHCH(NH_2)CH=CH_2).[/tex]
To learn more about hydration
https://brainly.com/question/11112492
#SPJ4
The molar heat of fusion for Iodine is 16. 7 kJ/mol. The specific heat capacity liquid Iodine is 0. 054 J/g degrees C.
Calculate the amount of energy (in KJ) required to melt 352 g of solid Iodine and then heat the liquid to 180 degrees C? The melting point of Iodine is 114 degrees C
The total amount of energy required to melt 352 g of solid Iodine and heat the resulting liquid to 180°C is 29.63 kJ.
The amount of energy required to melt 1 mol of Iodine is given as the molar heat of fusion, which is 16.7 kJ/mol. Therefore, the amount of energy required to melt 352 g of solid Iodine can be calculated as follows:
Number of moles of Iodine = Mass ÷ Molar mass
= 352 g ÷ 126.90 g/mol
= 2.78 mol
Energy required to melt 352 g of Iodine = Number of moles × Molar heat of fusion
= 2.78 mol × 16.7 kJ/mol
= 46.43 kJ
After the solid Iodine has melted, the resulting liquid must be heated from its melting point of 114°C to the final temperature of 180°C. The specific heat capacity of liquid Iodine is given as 0.054 J/g°C. Therefore, the amount of energy required to heat the liquid can be calculated as follows:
Energy required to heat the liquid Iodine = Mass × Specific heat capacity × Temperature change
= 352 g × 0.054 J/g°C × (180°C - 114°C)
= 1.67 kJ
The total amount of energy required to melt 352 g of solid Iodine and heat the resulting liquid to 180°C is therefore:
Total energy required = Energy required to melt the solid Iodine + Energy required to heat the liquid Iodine
= 46.43 kJ + 1.67 kJ
= 29.63 kJ
To know more about heat of fusion, refer here:
https://brainly.com/question/30403515#
#SPJ11
why graphite is a non metal yet it conducts electricity
Because the fourth electron of each carbon atom is unbound, graphite conducts electricity. As a result of the existence of free electrons in the structure, we may deduce that graphite is an excellent conductor of electricity.
When magnesium chlorate (Mg(ClO3)2 is decomposed, oxygen gas and magnesium chloride are produced. What volume of oxygen gas at STP is produced when 3. 81 g of Mg(ClO3)2 decomposes?
The volume of oxygen gas produced when 3.81 g of Mg(ClO3)2 decomposes is 1.18 L at STP.
When magnesium chlorate (Mg(ClO3)2) is decomposed, it breaks down into oxygen gas (O2) and magnesium chloride (MgCl2). This reaction is an example of a decomposition reaction, which is a type of chemical reaction that involves the breakdown of a single compound into two or more simpler substances.
To determine the volume of oxygen gas produced when 3.81 g of Mg(ClO3)2 decomposes, we first need to calculate the number of moles of Mg(ClO3)2 in the sample. We can do this using the molar mass of Mg(ClO3)2, which is 214.2 g/mol:
Number of moles of Mg(ClO3)2 = mass / molar mass = 3.81 g / 214.2 g/mol = 0.0178 mol
Next, we need to use the balanced chemical equation for the decomposition of Mg(ClO3)2 to determine the number of moles of oxygen gas produced:
Mg(ClO3)2 -> MgCl2 + 3O2
According to this equation, for every mole of Mg(ClO3)2 that decomposes, three moles of oxygen gas are produced. Therefore, the number of moles of O2 produced in the reaction is:
Number of moles of O2 = 3 x number of moles of Mg(ClO3)2 = 3 x 0.0178 mol = 0.0534 mol
Finally, we can use the ideal gas law to calculate the volume of oxygen gas produced at STP (standard temperature and pressure, which are 0°C and 1 atm, respectively). The ideal gas law is given by:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles, R is the gas constant (0.08206 L atm/mol K), and T is the temperature in Kelvin.
At STP, the pressure is 1 atm and the temperature is 273 K. Therefore, we can rearrange the ideal gas law to solve for the volume:
V = nRT / P = (0.0534 mol) x (0.08206 L atm/mol K) x (273 K) / (1 atm) = 1.18 L
Therefore, the volume of oxygen gas produced when 3.81 g of Mg(ClO3)2 decomposes is 1.18 L at STP.
To know more about oxygen, visit:
https://brainly.com/question/13370320#
#SPJ11
If a student starts with 300. 0 mL of a gas at 17. 0 °C, what would be its volume at 35. 0°C?
The volume of the gas at 35.0°C would be approximately 324.7 mL, assuming a constant pressure of 1 atm.
To solve this problem, we can use the combined gas law, which relates the pressure, volume, and temperature of a gas. The formula :
[tex](P_1 * V_1)[/tex] ÷ [tex]T_1 = (P_2 * V_2)[/tex] ÷ [tex]T_2[/tex]
We can assume that the pressure is constant since it is not mentioned in the problem. Also, we need to convert the temperatures to Kelvin by adding 273.15 to each Celsius temperature.
Using the formula and the given values, we get:
[tex](P_1 * V_1)[/tex] ÷ [tex]T_1 = (P_2 * V_2)[/tex] ÷ [tex]T_2[/tex]
[tex]V_2 = (P_1 * V_1 * T_2)[/tex] ÷[tex](T_1 * P_2)[/tex]
We can plug in the values:
[tex]P_1 = unknown\\V_1 = 300.0 mL \\T_1 = 17.0 + 273.15 = 290.15 K \\P_2 = unknown \\T_2 = 35.0 + 273.15 = 308.15 K[/tex]
Now, we need to assume a pressure value. Let's assume the pressure is constant at 1 atmosphere (atm). We can now solve for [tex]V_2[/tex]:
[tex]V_2 = (P_1 * V_1 * T_2)[/tex] ÷ [tex](T_1 * P_2)[/tex]
[tex]V_2 = (1 atm * 300.0 mL * 308.15 K)[/tex] ÷ [tex](290.15 K * 1 atm)[/tex]
[tex]V_2 = 324.7 mL[/tex]
To know more about combined gas law, here
brainly.com/question/30458409
#SPJ1
A 5. 00-g sample of aluminum pellets (Cs = 0. 89 J/g°C) and a 10. 00-g sample of iron pellets (Cs= 0. 45 J/g°C) are heated to 100. 0°C. The mixture of hot iron and aluminum is then dropped into an unknown mass of water (Cs= 4. 18 J/g°C) at 22. 0°C. The final temperature of the water and metals mixture is 23. 7°C.
How much heat (in J) is transferred to the water by aluminum pellets?
I am confused how to determine the mass of water
The amount of heat transferred to the water by the aluminum pellets is 382.87 J
To determine the mass of water, you can use the equation:
q = m x Cs x deltaT
where q is the amount of heat transferred, m is the mass of the substance (in this case, the water), Cs is the specific heat capacity of water, and deltaT is the change in temperature.
Using the final temperature of 23.7°C and the initial temperature of 22.0°C, we get:
deltaT = 23.7°C - 22.0°C = 1.7°C
We can plug in the values for the iron and aluminum pellets:
q = (5.00 g x 0.89 J/g°C x (100.0°C - 23.7°C)) + (10.00 g x 0.45 J/g°C x (100.0°C - 23.7°C))
q = 345.67 J + 347.85 J
q = 693.52 J
Now, to find the mass of water, we can rearrange the equation and solve for m:
m = q / (Cs x deltaT)
m = 693.52 J / (4.18 J/g°C x 1.7°C)
m = 97.1 g
Therefore, the mass of water is 97.1 g. To find how much heat is transferred to the water by the aluminum pellets, we need to subtract the heat transferred by the iron pellets from the total heat transferred:
q_aluminum = q_total - q_iron
q_aluminum = 693.52 J - (10.00 g x 0.45 J/g°C x (100.0°C - 23.7°C))
q_aluminum = 693.52 J - 310.65 J
q_aluminum = 382.87 J
Therefore, the amount of heat transferred to the water by the aluminum pellets is 382.87 J.
To know more about heat formula:
https://brainly.com/question/25603269
#SPJ11
